Jockey wheel traverse for train connections V

SKU: 415531
Category: AL-KO Kober
Manufacturers: <img src="https://www.afatekusa.com/media/image/manufacturer/9/xs/al-ko-kober_1.jpg" class loading="lazy" alt="AL-KO Kober"> <meta itemprop="image" content="https://www.afatekusa.com/media/image/manufacturer/9/xs/al-ko-kober_1.jpg"> AL-KO Kober

Description
Question about item

Jockey wheel traverses for traction connections V - 3,500 kg

If the support load is exceeded, no twisting of the bars, as was previously the case with external mounting of the jockey wheel
The installation of the jockey wheel between The bars enable safe and easier maneuvering by hand
The movable mounting bracket adapts the crossbeam to the respective bar position
The delivery is pre-assembled, which enables quick and easy assembly li>
Three standard lengths allow a wide variety of mounting positions

Area of application for V-chassis

Attachment:
The traverse can be attached to AL-KO tension connections (see sketch for attachment position). For this purpose, 2 holes 12.5 or 13 mm each are required in the neutral area of the bars (TÜV approval, see operating instructions).
Attention The support wheel traverse must lie against the upper edge of the train connection. The jockey wheel can be installed either in front of or after the traverse in the direction of travel.

Surface treatment:
Hot-dip galvanized, screws galvanized and also yellow chromated

Scope of delivery:
Traverse with pre-assembled mounting brackets and pre-assembled counter flange for clamps Ø 48 mm and Ø 60 mm or AL-KO flange support wheel.

Jockey wheel traverse for train connections V - 3,500 kg